Specifications and requirements

MediaMVP video decoder specification

Dedicated hardware decode support for MPEG-2 Transport Stream, MPEG-2 MP@ML, and MPEG-1. Decodes full CCIR601 resolution NTSC and PAL encoded MPEG-2 bit streams in real time, up to and including 720x480 (NTSC) or 720x576 (PAL).

Hardware audio decoder: MPEG-1 level 2 (MP3) or level 3 (PCM audio not supported at this time).

Decodes MPEG datarates from 1.5 Mbits/sec to 8 Mbits/sec

Video output: composite, S-Video and RGB (Scart equipped models only)

Upscales half screen resolution video to full screen. For example, MediaMVP will take 320x240 VCD video and play it full screen. It also offers a tunable Anti-Flicker Filter.

Three level anti-flicker filter

Outputs NTSC and PAL video, software selectable

MediaMVP audio decoder specification

Dedicated hardware decode support for MPEG-1 level 2 or level 3 audio (MP3 audio).

Decodes MP3 audio with datarates up to 320 Kbits/sec, variable or fixed

Decodes mono and stereo. Mono audio sent to both left and right channels.

TV Set Requirements

Composite or S-Video input on North America models. Scart input on European models.

Left and right audio input jacks (or Scart on European models)

PC System Requirements

Microsoft® Windows® XP Home, XP Professional or Windows2000

128MB RAM and 20GB hard disk space (minimum recommended)

Internet Explorer 6.0 or later

Processor: 750MHz or faster. 1.8GHz P4 or faster to play DivX movies.

CD-ROM drive for loading software

Network Requirements

One 10/100 RJ-45 port on a Router, Hub or Switch
or

Direct connect from MediaMVP to PC via cross over LAN cable (not supplied)

Included in the MediaMVP package

MediaMVP digital media receiver device

Stand

Wall mounted power supply

Remote control with batteries

MediaMVP Installation CD-ROM

MediaMVP QuickInstall Guide

1.5 meter A/V cable set

1.5 meter Ethernet cable